INTRODUCTION
The work in the construction industry involves the client, the Architect, the Engineer, the quantity surveyor and the builders. A structural project is initiated by the Engineer (civil Engineer).
The process of designing begins with the enginer&r...
INTRODUCTION
Residential Building: This is defined as the building which sleeping accommodation is provided for normal residential purposes. It is provided with or without cooking or dining or both facilities. Residential building includes one or...
Deterioration of reinforced concrete bridge decks has been a major problem in the country. Both Federal Ministry of Works and Federal Roads Maintenance Agency records show that as at the year 2008, there were 1,696 Bridges that had been completed from year to year an...
ABSTRACT
In this research, experimental research was carried out to assess the flexural and shear capacities of RC beams strengthened with different amount of carbon fibre reinforced polymer laminates at the tension face and U-strips. Twelve rectangular RC beams of cross-sectional dimen...
ABSTRACT
In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client.
The structural engineer designs...
Abstract
A Carbon fiber-reinforced polymer (CFRP) has emerged as promising material for rehabilitation of existing reinforced concrete structures. However, one of the major concerns of using this material is its high cost. In this research, a classical optimization technique was employe...
ABSTRACT
This dissertation is a report of the investigation carried out on the Probabilistic analysis of reinforced concrete columns subjected to corrosion. Corrosion of reinforcement bars is one of the most significant causes of deterioration of reinforced concrete columns. The deterio...
ABSTRACT
Effect of vertical rectangular openings on the flexural strength of reinforced concrete beam is presented. Twelve reinforced concrete beams of dimension 200m x 230mm x 700mm with different sizes of rectangular openings, 25mm x 35mm, 50mm x 60mm and 75mm x 85mm which are placed...
ABSTRACT
The quality of the bonded concrete overlay depends on the bonding at the layer’s interface, which is affected by parameters such as fibre inclusion and content in new concrete, moisture condition and surface roughness of old concrete surface. This research presents an exp...
ABSTRACT
Water intake towers are typically tall, hollow, reinforced concrete structures and form entrance to reservoir outlet works. It is observed that most dam intakes in Nigeria are not functional due to no way to monitor assets. In this work, the best type of tower was selected and...
ABSTRACT
Water intake towers are typically tall, hollow, reinforced concrete structures and form entrance to reservoir outlet works. It is observed that most dam intakes in Nigeria are not functional due to no way to monitor assets. In this work, the be...
ABSTRACT
This study was carried out on the analysis of the effect of reinforced concrete on safety of residential building in Owerri west LGA Imo State. Specifically, the study aims to iassess the extent at which concrete is used on resident...