1. IDENTIFICATION OF REFURBISHING IN MECHANICAL ENGINEERING DRAWING STUDIO
INTRODUCTION
Many specialists from the construction and furnishing industries have defined the term refurbishment in various ways. The Oxford Advanced Learners Dictionary meaning of refurbishment is the most extensively used and well recognized term. According to P...
2. ASSESSMENT OF SAWDUST ACTIVATED CARBON (SAC) IN THE TREATMENT OF AQUACULTURE EFFLUENT
ABSTRACT
This study is aimed at the assessment of sawdust activated carbon in the treatment of aquaculture effluent with various objectives which includes the determination of the SAC properties, effluent parameters, effect of operating conditions and application of relevant adsorption...
3. DESIGN, CONSTRUCTION AND TESTING OF AN IMPROVED CASTING POURING LADLE
ABSTRACT
A ladle is a foundry tool or equipment specially designed to pour molten metal into a prepared mould. The pouring rate or consistency is one of the factors that may lead to a defect in a cast. To avoid casting defects (cold shut and misrun) associated with pouring, there is nee...
4. SUITABILITY OF SNAIL SHELL PARTICLES AS AN ENERGIZER FOR CARBURIZING MILD STEEL
ABSTRACT
The suitability of hardwood charcoal and snail shell particles for carburizing mild steel was investigated. All the mild steel specimens were carburized at constant temperature of 920°C from one (1) to five (5) hours at intervals of one hour. The mild steel specimen in the...
5. EVALUATION OF A CO-PROCESSED EXCIPIENT FROM COW BONE POWDER AND GELATIN FOR USE IN DIRECT COMPRESSION TABLETING
ABSTRACT
The objective of the study was to develop an excipient consisting of cow bone powder and gelatin by the co-processing method and to evaluate its use in direct compression tablet formulation. Co-processing is based on the novel concept of two or more excipients interacting at th...
6. DEVELOPMENT OF A 5KG CAPACITY INDUCTION FURNACE FOR MELTING ALUMINIUM
ABSTRACT
Aluminium in Nigeria is a popular metallic element. Widely used to produce single domestic appliances and even industrial engine components. These components display a decrease in performance level after many years of service are discarded and they become waste that tend to be...
7. TORREFACTION AND CHARACTERIZATION OF MAHOGANY SAWDUST FOR SOLID FUEL PRODUTION
ABSTRACT
As interest in biomass utilization into combustion fuels grows, the torrefaction, becomes ever more important. Torrefaction is aimed to maximize energy by removing undesirable components (water, hemicellulose and volatile matter) which cause poor ignition characteristic, excess...
