DEVELOPMENT OF FISH POND MONITORING AND CONTROL SYSTEM
- Project Research
- 1-5 Chapters
- Abstract : Available
- Table of Content: Available
- Reference Style: APA
- Recommended for : Student Researchers
- NGN 3000
ABSTRACT
Automated system of fish farming has become inevitable due to the immense importance of fisheries aquaculture. The efficiency of any fish rearing system depends on monitoring and control of pond water quality parameters as well as adequate feeding and a reliable power source. This work presents a fish pond monitoring and control system that improves on the efficiency of fish rearing. A sensor network consisting of temperature, pH, turbidity and water level sensors was used to measure water quality parameters and then relay the readings to the pond manager through a Global System for Mobile communication (GSM) module. Automatic feeding system controlled by servo motor and a real time clock (RTC) for adequate feeding of the fishes was also developed. The turbidity sensor was used to prevent feed wastage (and hence water pollution). Readings obtained from the sensors were displayed on liquid crystal display (LCD). An automatic water circulation system controlled by pumping machine and filters for pond water purification was also developed. The water level sensor ensured that the fish pond is filled with water only to the optimum level. Microcontrollers (Arduino Uno and Arduino mega) programmed using C++ language were used to effect the monitoring and control of the system. Each sensor was interfaced with the microcontrollers through analog to digital converters (ADC). A prototype fish pond was constructed to demonstrate the workability of this system and several tests were carried out on this prototype to verify the efficiency of the designed system. A total number of ten (10) catfish fingerlings were reared for a period of six (6) weeks within which water quality parameters, weight gain, and feed consumed were measured. Readings obtained were analyzed using Feed Conversion Ratio (FCR), which is measured as a ratio of the ratio of the total amount of feeds given to the total gain in weight by the fishes, and Feeding Efficiency (FE), measured as the inverse of the FCR expressed as a percentage. Similar amount of fishes were reared using a manually operated fish pond and the readings obtained were analyzed using the same parameters and then compared with the results from the designed automated system. The test results showed that the FCR for the fishes reared using the developed prototype was 1.18, which is smaller than that of the manually operated system which was 1.82. This indicated that fewer amounts of feeds were used in the developed system to achieve a higher productivity as compared to the manual system. Also, the FE of the fishes reared using the developed system was 84.7% which indicated a higher feeding efficiency as compared to 54.9% obtained in the manually operated system. Furthermore, the average gain in weight per fish for fishes in the automated system for the six weeks experimental period was 28.95g as compared to 18.45g of those in the manually operated system. These results also indicated a higher level of efficiency as compared to many existing automated fish ponds especially in the area of feeding efficiency. These results further showed the robustness and efficiency of the developed system over the conventional manual system of fish rearing.
Related Project Materials
THE IMPACT OF CULTURAL COMPETENCE ON VOCATIONAL TRAINING OUTCOMES
Abstract: This research investigates the impact of cultural competence on vocational traini...
FACTORS MILITATING AGAINST THE EFFECTIVE TEACHING – LEARNING OF TECHNICAL EDUCATION IN JUNIOR SECONDARY SCHOOLS
BACKGROUND OF STUDY
Vocational/ technical education are among the vital tools an individual can use to...
THE NEED FOR PLANNING IN AN ORGANIZATION
ABSTRACT
This study was centered on the need for planning in an organization. This study was guided by the following obj...
CONSTRUCTION OF A MICROCONTROLLER BASED
ABSTRACT
Microcontroller based automate controller is a project design of a system that is used in operating a gate automatically. The sy...
IMPACT OF INFORMATION TECHNOLOGY ON THE SECRETARIAL PROFESSION
STATEMENT OF PROBLEM
Even though modern technology is regarded as important and of high value in ensuring quality...
IMPACT OF ICT IN ENHANCING ADULT EDUCATION
Abstract: This research investigates the impact of Information and Communication Technology (ICT) in enhancing adult education. The study aime...
CHALLENGES OF WOMEN STARTING A BUSINESS ENTERPRISE IN NIGERIA
ABSTRACT
This study is aimed at examining the challenges of women in starting a business enterprise in Niger...
IMPACT OF GLOBAL FINANCIAL CRISIS ON RESIDENTIAL PROPERTY MARKET
Background to the Study
Several local and international media have reported on the cause, impacts and the consequences o...
ISOLATION AND IDENTIFICATION OF MICROBES ASSOCIATED WITH SPOILAGE CANNED FOOD SOLANUM LYCOPERSICUM
ABSTRACT
Lactic acid bacteria (LAB) associated with gaseous spoilage of modified – atmosphere – packaged, ra...
RELEVANCE OF CRIME SCENE TESTIMONIES ON A SUSPECT IN NIGERIA
EXCERPT FROM THE STUDY
Crime is said to be as old as society itself and it is a diver’s concept which changes chro...
