0704-883-0675     |      dataprojectng@gmail.com

DEVELOPMENT OF PILOT SIZE PROCESS FOR ZEOLITE Y AND ZSM-5 PRODUCTION FROM KANKARA KAOLIN

  • Project Research
  • 1-5 Chapters
  • Abstract : Available
  • Table of Content: Available
  • Reference Style: APA
  • Recommended for : Student Researchers
  • NGN 3000

ABSTRACT

The successes recorded at the laboratory for the synthesis of zeolite Y and ZSM-5 using Kankara kaolin sourced from Katsina state, Nigeria as starting material necessitated the need for upscale of the production process. This thesis focused on the development of three pilot size production units and characterizing the products obtained from those units. Pilot size reactors for dealumination and production of zeolite Y and ZSM-5 were developed and test run. Manual means of design was adopted; the materials of construction were carefully selected for the fabrication stage. The process of producing zeolite from kaolin involve, kaolin beneficiation, calcination, dealumination, zeolite recipe preparation and crystallization. The capacity of the pilot size dealuminator, zeolite Y and ZSM-5 reactors were 2.5 kg, 2 kg and 4 kg per run respectively. The reaction temperature and time for the production of zeolite Y were 100°C and 7 hours respectively. Low temperature production of ZSM-5 was achieved at 95°C for a period of 5 days. The physicochemical properties of the raw material, intermediate products (beneficiated kaolin, metakaolin and silica), and final products (zeolite Y and ZSM-5) were characterized using Fourier Transformation Infrared (FTIR), X-ray Diffraction (XRD), X-ray Fluorescence (XRF), Thermogravimetry Analysis (TGA), Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), Selected Area Electron Diffraction (SAED), Energy Dispertive x-ray Spectrometer (EDS), and Brunauer-Emmett-Teller (BET) methods. Dealumination reactor efficiency of 88%, 94%, 97% and 98% in terms of solid product quality was obtained from interior surface without coating, silicone caulk coating, ceramic tiles lining and glass lining respectively. The product obtained from the dealumination reaction was majorly alum and silica. The silica-to-alumina ratio of the zeolite Y produced vii was 3.08 and the crystals were well formed having a specific surface area, average pore size and pore volume of 321 m2 /g, 34 Å and 0.270668 cm3 /g respectively. The crystals of ZSM5 produced were good as revealed by SEM, with high specific surface area of 411 m2 /g, average pore size and pore volume of 24 Å and 0.248190 cm3 /g respectively. The silica-toalumina ratio of the produced ZSM-5 zeolite was 77. The quality of zeolite Y and ZSM-5 produced using the developed pilot size reactors were comparable to those synthesized in the laboratory. From the performance test on hydrocracking reaction carried out in a fixed bed reactor, Pt/H-ZSM-5 performed better than Pt/La-zeolite Y. Maximum conversion of nhexadecane was 98% at reaction temperature of 265 °C for Pt/H-ZSM-5, while 94 % conversion was obtained for Pt/La-zeolite Y at reaction temperature of 315 °C. The prepared catalysts showed high selectivity for gasoline fraction than diesel and lighter fraction products. Cracking was more favored than isomerization during the hydrocracking reaction. The pilot size production units designed had proven to produce good zeolite Y and ZSM-5 from Kankara kaolin which were active in terms of catalytic performance of the zeolite based formulated catalysts.




FIND OTHER RELATED TOPICS


Related Project Materials

IMPACT OF CAREER MANAGEMENT ON ORGANIZATIONAL PERFORMANCE

Background Of Study

The imperative of modern human resources practice articulates an integrated approac...

Read more
AN EVALUATION OF PERFORMANCE OF SENIOR SECONDARY SCHOOL STUDENTS IN GEOGRAPHY IN SOME SELECTED SECONDARY SCHOOLS

Background To The Study

In the present age of science and technology, secondary school is viewed as a c...

Read more
A TERM PAPER ON MANAGING HUMAN RESOURSES FOR IMPROVED ORGANIZATION EFFECTIVENESS

Abstract

Human Resource is a very important input in the production matrix. Other seven inputs include materials, money, time, energy, kn...

Read more
THE ROLE OF MEDIA AND COMMUNICATION IN TOURISM DEVELOPMENT

ABSTRACT

The media is increasingly playing an important role in promoting tourism. The SAT Strategy (2013: 12) suggests that the opportun...

Read more
AUDITING AS AN INSTRUMENT FOR ORGANIZATIONAL SUCCESS

ABSTRACT

Auditing is continually changing and developing to meet the needs of the business environment it serves. The r...

Read more
EARNINGS MANAGEMENT AND FIRM’S PERFORMANCE IN NIGERIA  

Abstract

This research work assess earnings management and firm’s performance in Nigeria. In the course of this wo...

Read more
THE IMPACT OF MOTIVATION ON EMPLOYEES PRODUCTIVITY IN AN ORGANIZATION

ABSTRACT

This study examined Motivation and Employee productivity. Faced with the problem of low employee productivity,...

Read more
PROBLEMS AND PROSPECTS OF MAIZE PRODUCTION

ABSTRACT

This study was specially designed to find the problems and prospects of maize production in Kaduna State. In carrying out this s...

Read more
THE IMPACT OF FINANCIAL DEVELOPMENT ON ECONOMIC GROWTH IN NIGERIA

ABSTRACT

 The Nigerian financial system experienced series of reforms and amidst these reforms an important compon...

Read more
THE ROLE OF CUSTOMER FEEDBACK IN IMPROVING SALES STRATEGIES

THE ROLE OF CUSTOMER FEEDBACK IN IMPROVING SALES STRATEGIES

This study investigates th...

Read more
Share this page with your friends




whatsapp